Advantages of Rust Proofing Your Car

A lot of car owners tend to overlook the importance of rust proofing a vehicle on a regular basis. Rust and corrosion are destructive forces that can ravage the metal components on your automobile. These undesirable forces should not be ignored, especially if you live in Ontario.
Ontario winters can be brutal, there is no question about that. Your vehicle will be exposed to all sorts of harsh elements and conditions like snow, ice, freezing rain, hail, sand, and salt.
Combine these conditions with the heat, humidity, and the baking sun in the summer and circumstances are ideal for the formation of rust.
An unprotected vehicle will be much more exposed to the environment that rust needs, to thrive and spread. Rust is formed when the metal parts on your car are subject to long periods of contact with moisture and oxygen. Throw salt into the mix, and it acts as an accelerant for rust and corrosion.
Driving in the winter without rust proofing, opens up the chance for salt and moisture to get stuck in all the cracks and crannies in your car.
Then summer comes along, and the temperatures begin to rise, which activates the salt and moisture to begin forming rust.
Aside from the salt that is used to make roads less slippery in the winter, sand and stones are sometimes used as well. A vehicle without rust proofing is more vulnerable to chips and cracks that can eventually rust.

How does rust proofing help prevent this damage caused by the elements?

Rust proofing involves a protection coating being applied to your vehicle. This coating establishes a strong bond with the metal components of your car. This coating is also fully applied to all the cracks, crevices, and seams that are susceptible to rust and corrosion.
This protective bond helps keep out moisture, salt, dirt, and debris, while guarding against chips and nicks.

Valvoline Express Care Brampton

Valvoline Express Care is a professional automotive service provider that specializes in rust proofing.
If you are looking for an experienced, affordable, and reliable rust proofing service in the Brampton area, Valvoline has you covered.
The rust proofing specialists at Valvoline Express Care use a special chemical compound that provides durable and lasting protection for your vehicle.
The rust proofing service will not only treat existing chips and cracks, but will also provide future protection against this type of damage.

Types of Rust Proofing

There are several types of rust proofing to choose from when looking to protect your car. Different approaches are available, depending on your specific requirements. Some of the options to consider are:

  • Dripless oil spray
  • Drip oil spray
  • Tar-based undercoating
  • Electronic

Dripless Oil Spray

This method involves using a colorless spray, that is waxy in texture and hardens once it is dry. This spray is applied to the entire automobile for protection.
Pros: The spray hardens upon drying, so there is no mess to clean up.
Cons: In order to cover the entire vehicle, holes must be drilled into the doors and fenders, so the spray can permeate throughout.
Also, this spray is quite viscous, making it difficult to penetrate smaller crevices and cracks.

Drip Oil Spray

This is the most popular type of rust proofing. Drip oil spray is a more fluid spray that can access hard to reach areas more easily.
Pros: More versatile than the dripless spray, can get into cracks and small opening without complication.
Cons: Holes must be drilled in doors and fenders with this type of spray as well, to ensure comprehensive protection.
Drip oil spray may continue to drip for as along as 48 hours after the initial application, which may leave stains and a bit of a mess behind.

Tar-based Undercoating

As suggested by the name, this method targets the undercarriage of the vehicle. A tar-based spray is used with this approach, and is applied to the underbody, wheel wells, and floor pans of your car.
Once this tar-based spray hardens, it provides a permanent guard against moisture, salt, and other damaging elements.
Pros: Provides very thorough protection, and if done right will last a long a time.
Cons: It does not cover the entire vehicle, does not treat existing rust and corrosion, and can be counter-productive if not done properly.

Electronic Rust Proofing

This is a fairly new development in the rust proofing game. It works by installing a small, electronic device in your car. This device stops rust from forming by sending an electronic current throughout the vehicle’s metal components. This current helps break up the charge between the metal and oxygen before rust can form.
Pros: Easy to install, and is a one-time purchase.
Cons: The effectiveness of this method is not widely documented, as it is still relatively new.