One of the most crucial factors a car owner must consider when it comes to maintenance is rust prevention. Protecting your vehicle from rust and corrosion is a serious undertaking because once rust forms it is difficult to eliminate, and damage and destruction done by rust is irreversible.

What is Rust?

Rust is a reddish brown oxide that can accumulate on iron and its alloys, like steel and other metals. Rust is formed when oxygen and moisture come into contact with these metals for prolonged periods. Rust is actually an iron oxide, which is created from electrochemical reactions produced by the combination of these elements.

Why is Rust Formation so Prevalent?

When you think of the components required for rust formation: oxygen, moisture, and metal, it is no surprise that rust and corrosion is problematic for a lot of car owners. Many vehicle owners tend to take on an attitude of surrender, believing there is no effective way to prevent rust from forming.

Obviously, your vehicle is made up of metal components, and it is going to be exposed to oxygen and moisture on a regular basis. Effective measures can be taken to stop rust before it starts.

Outdoor Elements

Depending on the season, there are a variety of outdoor elements and weather conditions to take into consideration. 

Canadian winters can ravage the metal components on your vehicle if not properly protected. Not only is there a continual presence of oxygen and moisture around your vehicle during the winter, there are also roads covered in salt and sand to contend with. Road salt accelerates the formation of rust and can easily get entrapped in the cracks and crevices or your vehicle, slowing breaking down the metals. 

As the weather changes and temperatures warm up, this is when those concealed salt deposits really start to go to work on corroding your vehicle. Canada’s changing seasons put an even greater burden on car owners to ensure vehicles are adequately safeguarded.

Is Manufacturer Rust Proofing Enough?

Automobile producers often take some precautions to prevent vehicles from rusting before the car is even driven off the lot. A technique called galvanization employs the use of chemical solutions to provide vehicles with a built-in layer of rust proofing.

However, this protection eventually wears off as time goes on and should be replaced with another form of rust proofing. Even small scratches on the body of your vehicle caused by rocks or debris coming off the road can compromise the effectiveness of manufacturer rust protection.

To ensure your car is fully protected, regular maintenance checks and rust proofing services can increase the value and life of your vehicle.

Tips for Rust Prevention

Engaging in a few helpful practices can help prevent rust from forming and destroying the body of your vehicle.

Some useful rust prevention tips, include:

• Regular car washes
• Wax and sealants
• Cleaning and detailing
• Expert rust proofing

Regular Car Washes

Having your car washed on a regular basis is not only good for the appearance, but also for performance and protection. A professional car wash will help remove any embedded salt, dirt, and other contaminants that can damage your vehicle.

Wax and Sealants

Applying wax or sealers after a wash is an effective way to protect the finish from chips and scratches. Your paintjob provides a good level of protection for the metal body, but if the metal becomes exposed, it is vulnerable to rusting. Waxing helps keep the finish intact.

Cleaning and Detailing

It is also critical to keep the inside of your vehicle clean to prevent rust formation. Rust damage can start from the inside of your car if it is not kept clean. Accumulated dirt and grime can attract moisture, creating the perfect conditions for rust and corrosion.

Professional detailing can help keep your vehicle in pristine condition, inside and out.

Rust Proofing Brampton

For professional rust proofing and auto maintenance in Brampton and the GTA, Valvoline Express Care offers an excellent solution.

The experts at Valvoline can help extend the life of your vehicle, while preventing rust, deterioration, and break down.

As a vehicle owner, it can be particularly challenging to find affordable ways to protect your vehicle from damage and keep it running at optimal levels. Auto maintenance may seem like an unnecessary expense, but it can end up saving you considerable sums of money in the long run. One of the most crucial aspects of routine maintenance car owners should be concerned with is rust protection. Rust and corrosion can cause irreparable damage to your vehicle. As rust forms and spreads it can eradicate the metal components on your vehicle. This includes the body of your car that protects you from accidents and injury. If the body of your vehicle is compromised by corrosion, it is not safe for you and your passengers.

Brampton Auto Rust Proofing

Drivers in Canada are at a distinct disadvantage when it comes to vehicle protection due to extreme weather conditions and perpetually changing seasons. In the winter, your car sees exposure to ice, snow, and salt, followed by periods of heavy rain in spring, and baking heat in the summer. This seasonal cycle provides an ideal recipe for rust formation. So, when is a good time for professional rust proofing? Car owners in Brampton, Mississauga, Toronto, and all around the GTA can benefit from Valvoline Express Care expert rust proofing services.

When to Rust Proof

Truth be told, there is really no wrong time to rust proof your vehicle as long as it is clean when the rust protection is applied.

Rust Proofing New Vehicles

Just after a vehicle is purchased makes for ideal time to have it safeguarded against rust formation. Many manufacturers offer rust proofing as an add-on feature, leaving it up to the new owner to decide if it is a necessary feature. If your new vehicle does not include rust proofing, or the manufacturer rust protection appears to be sub-standard, then getting a professional auto service to do your rust proofing is recommended.

Rust Proofing Used Vehicles

Regardless of how old your vehicle is, it is never too late to have it safeguarded against rust and corrosion. The most important aspect of rust proofing a used vehicle is to make sure the automobile is thoroughly cleaned before application. Implementing rust proofing to a vehicle covered in dirt and grime is counter-productive. For the ultimate protection of a used vehicle, having the car professionally cleaned and detailed before rust proofing is the way to go. This type of investment can end up saving you money on expensive repair bills, and can help preserve the resale value.

Rust Proofing Techniques

There are a few options to choose from when it comes to rust protection, depending on your vehicle type and objectives. Some rust proofing options include:

• Undercoating
• Oil spray
• Drip spray

Undercoating

Protecting the undercarriage of your vehicle is essential for the prevention of rust and corrosion. The underside of your car is susceptible to chips and cracks caused by debris flying up off the road. Undercoating spray provides a rubberized layer of protection against scratches and blemishes, as well as the salt and moisture that lead to rust formation.

Oil Spray

This technique uses a viscous oil-based spray which is applied to the metal components of the vehicle. It dries quickly and hardens to form a thick, protective layer. Due to the viscosity and inflexibility of the substance, it is difficult to get into cracks and crevices.

Drip Spray

One of the more popular methods of rust proofing application is the drip spray approach. Drip spray employs the use of a more watery oil-based spray, that trickles down and gets into all the corners and hard to reach areas.

Steps to Successful Rust Proofing

To provide your vehicle with optimal rust protection, the job should be done thoroughly and properly by a trained professional. Expert rust proofers help ensure:

• Your vehicle is meticulously cleaned before rust proofing
• The undercarriage is fully coated and covered
• Rust protection is comprehensive and effective

The hazards of winter driving aren’t limited to ice and snow. One of the biggest threat road salt poses to a vehicle is rust – especially with us Canadians. So you can only imagine driving on the long, cold roads; and the amount of salt (along with ice and freezing rain) that accelerate the corrosive process and permit the exposed metal. And by extension, cause extreme damage to your vehicle. Rust proofing Brampton: to rust proof or not to rust proof? A better question would be: do you love your car and plan on keeping it for a long time? At Valvoline Express Care Brampton, our qualified technicians offer 6 reasons why you should invest in rust proofing protection for your car.

A better-looking vehicle

One of the best recommended ways to maintain your car’s appearance is with rust proofing Brampton. A clean, rust free vehicle is much more attractive than one that is rusty. Preserve the value of your new or old vehicle.

Increases resale value

Corrosion can decrease the value of your ride. Obviously, vehicles that are free of rust damage will sell quicker, and for more money. Whether you decide to sell or trade it in for a newer model, rust proofing Brampton can increase your vehicle’s resale value.

Positive environmental impact      

Concerned about the environment? So are we! At rust proofing Brampton, our rust application can guard your car against harmful corrosion. In doing so, you keep your car on the road running for longer. Which means, you can prevent your car from retiring prematurely (and ending up in the scrap yard before its time). Why not add 2 or 3 years to the life of your vehicle? More of the vehicle’s metal and components can be recycled and reused, reducing the amount of waste that is created.

Longer life

Cars are expensive and many of us would like them to last longer. Our industry leading rust proofing application offers powerful protection for all metals and superior lubrication for all moving parts. If you plan to keep your car in excellent condition for years to come, rust proofing Brampton can help keep rust away.

Reduces repair cost

Vehicles that are properly protected against corrosion generally have fewer maintenance issues. At rust proofing Brampton, we will help drastically reduce the cost of replacing rusty brake lines, suspensions, key electrical parts, and other repairs in the long run.

Safer vehicle

If rust goes unnoticed, it can spread to areas of the vehicle that could impact its ability to run safely. A rusty vehicle will eventually have its structural integrity compromised, which may lead to a collision on the road. Rest easy knowing rust proofing Brampton keeps your vehicle safe by preventing possible breakdowns caused by corrosion.

Get your car winter ready at rust proofing Brampton.

Want to keep your vehicle looking and feeling like new? We believe this answer to be a no brainer. Rust proofing annually (once a year) is a great way to prolong the life of your vehicle’s body, and maintain its value.
 

The Rust Check rust proofing method is a proven approach to providing optimal rust protection for your vehicle.

The Rust Check product was first introduced way back in 1973 and vehicle owners have been reaping the benefits of protection ever since.

The Rust Check method is so effective because the Rust Check spray has enough viscosity to provide excellent protection, but it is not as thick as most rust proofing sealants which don’t penetrate small cracks and hard to reach areas.

Preventative rust proofing is the recommended approach, to stop rust before it has a chance to start.

Once rust has begun to from, it can be contained and managed, but the process cannot be reversed.

Don’t wait until you spot rust on your car to begin rust proofing treatments.

What is the Rust Check method?

The Rust Check method involves using a light oil-based spray that contains active additives that prevent the formation of rust and corrosion.

The Rust Check spray is able to penetrate deep into the gaps and fissures in your car to expel moisture and prevent it from getting back in.

Moisture is one of the required ingredients for rust formation. The other is oxygen. If the metal components of your vehicle are exposed to the combination of oxygen and moisture for too long, rust and corrosion could soon strike.

What does the Rust Check method protect?

The Rust Check process ensures that all exterior metal trim and electrical connections and components are full rust protected.

This include things like:

• Door posts
• Front cowling
• Trunk and perimeter
• Trailer hitch and any attached wiring
• Hood and inner panels
• Fenders and bumpers
• Tail lights
• Wheel wells
• Headlights
• Door panels
• Undercarriage

These are a few examples of the kind of comprehensive coverage the Rust Check method provides.

Rust Check Employs a 2-step Process

The proven Rust Check approach involves two main steps to ensure full protection from rust and corrosion.

Step 1 – Rust Check

The first product used in the Rust Check method is a lighter oil-based spray that is applied to all the hinges, bends, folds, and cracks that are found throughout the vehicle.

Step 2 – Coat & Protect

The second step involves using a thicker oil-based spray that is applied mainly to the undercarriage of the vehicle. This provides exceptional protection without sealing in moisture which can cause rusting.

Benefits of the Rust Check Method

There many great advantages to be gained by regularly protecting your vehicle with Rust Check.

Some of the main benefits are:

• Versatile and effective protection
• Does not dry out or crack
• Does not damage the finish
• Good for new or used vehicles
• No offensive odours

Versatile Protection

Rust Check rust proofing is so effective because of the versatility the two-step approach provides. The combination of distinctive sprays provides a much more through protection than your average rust proofing sealant.

Doesn’t Dry or Crack

Unlike rust proofing sealants, the Rust Check spray never dries out, so you don’t have to worry about cracking or peeling off.

No Paint Damage

If the spray gets on the paint job during the rust proofing process, it is easily wiped off with no lingering effects.

New or Used Vehicles

Rust Check provides outstanding rust protection for vehicles, whether they are brand new or have seen a lot of miles.

Although no rust proofing method can reverse the rusting process, Rust Check prevents the spread of rust.

No Odour

Rust Check spray does not have a strong odour like many sealants do.

Rust Proofing Brampton

For experienced and effective rust proofing service, employing the Rust Check method, Valvoline Express Care is an ideal choice for rust protection.

Keep your car protected against Canada’s extreme weather conditions with regular rust proofing.

The Rust Check method is suggested at least once per year to provide maximum protection.