Maintain beauty of your car by Auto Rust Proofing

Maintain beauty of your car by Auto Rust Proofing

by | Dec 23, 2021 | Rust Proofing Brampton

Are you looking for the most cost-effective Brampton auto rust proofing? Smart vehicle owners are aware that undercoating and rust proofing protect cars from oxidization. Rust is often an issue for the chassis or supporting structure of cars due to water, dirt, salt, and other fragments from thoroughfares.

Auto rust proofing should be applied right after you purchase the vehicle and before it is driven. Prevention of corrosion could be useless for used cars since you simply cover the dirt that has accumulated. The key is to employ rust proofing while your vehicle is still with the dealership. Majority of car distributors’ offer said services as added feature when you purchase a new vehicle. This is probably the perfect time for applying primer and anti-rust solutions since the bodywork is still clean.

It does not mean car owners are not supposed to rust-proof used vehicles. In fact, you can apply undercoat for protection against further rusting. There are different techniques in rust proofing.

  • Undercoating entails spraying rubberized coat made from latex, plastic resin and tar. This solution prevents moisture, road salt and chips from sticking to the framework beneath your vehicle.
  • Oil Spray (DRIPLESS) is a wax-like material that is applied on the vehicle’s body and hardens as soon as it gets dried. This has extreme thickness so it is not capable of penetrating the car’s corners and crevices. You need to drill holes to achieve this goal.
  • Drip spray is the most widely-used method for Brampton auto rust proofing. It trickles for a maximum of 48 hours until the oil has dried. It goes through vehicle interiors compared to other procedures. Drilling is still required for doors and fenders so the oil can seep in the interiors.

For successful rust-proofing, it is important to clean your car’s underside thoroughly. The rust is removed by using a grinder and sandpaper. Make sure to take away the dust produced by grinding and sanding. The sandpaper must be made for metal with grit of 220 or higher. The next step is to prime and paint the chassis using zinc primer if possible. See to it that the primer is dried before painting with black car paint.

The final step in auto rust proofing is to undercoat the vehicle body. Apply the rubberized undercoating to all exposed parts. See to it that everything is dry for at least an hour or even longer based on the instructions.

The truth is rust proofing should be implemented while the vehicle has not been used. It keeps your car safe from corrosion, grime, water, and other filthy substances. Consult an experienced auto mechanic or reputable auto rust proofing provider for the best results. Quality should not be compromised even if you are looking for inexpensive Brampton auto rust proofing.

Vehicle Oil Change Brampton

Vehicle Oil Change Brampton

by | Nov 30, 2021 | oil change brampton

There are many ways to adequately prepare your vehicle for Canadian winter. Taking some precautionary measures before winter comes out in full force, can be a tremendous advantage for your car and your wallet.

Preventative maintenance can save you money by avoiding expensive trips to the mechanic and preserving the value of your vehicle. This is why regularly scheduled automotive maintenance is so beneficial. A perfect time for a scheduled maintenance session, is just before winter. Having your oil changed is an important part of consistent upkeep.

 

How often should oil be changed?

Waiting until smoke starts coming from your engine is not the best way to realize it’s time for an oil change. The general belief is that oil should be changed anywhere between 5000 and 10,000 kilometers. How often you actually change your oil can depend on a number of factors, such as:

  • How often you drive
  • Driving conditions
  • Type of vehicle
  • Type of oil
  • Personal preference

It is a good idea to consult your driver’s manual to see the recommended frequency for oil changes. There really is no such thing as changing your oil too often. Frequent oil changes will cause no damage to your engine, so feel free to have your oil changed as often as you like to prevent worry and stress.
Does oil need to be changed more often in the winter?

Again, this will be dependent on various outside factors, but the short answer is “yes”. The technology found in automobiles these days is quite sophisticated. When the “change oil” light comes on in your vehicle, it happens based on all kinds of factors and influences. Some of the things that get taken into account are:

  • Average engine temperature
  • Ambient air temperature
  • Weight of load in your vehicle
  • Length and duration of excursions
  • How frequently the engine is run without hitting maximum heat level

These are just a few examples to give you an idea of the complex inner workings behind your “change oil” light. This is why the change oil light may come on more frequently during the winter. Having your oil changed before the winter season, keeps the engine at optimal performance levels when it may need to work a little harder during the winter months.

 

Why does oil need to be changed regularly?

The main purpose of oil in your vehicle is to provide lubrication for the many components of the engine that rub against each other and cause friction. Without oil, there is nothing to absorb the heat created by this friction, which can quickly lead to the engine overheating.

Eventually, oil will break down and become contaminated just through regular use. Sludge and debris will build up in the oil over time, making it less effective at lubricating the engine and absorbing heat.
Oil contamination is also a result of water and fuel getting into the oil reserve. Water can get into the oil when condensation forms on the metal components of the engine. This typically occurs by taking short trips in the winter, not giving the engine enough time to heat up fully.

It is similar with gasoline or fuel. When you start up your engine in the cold weather, a fuel injected engine will produce a richer mixture, which can result in unused fuel getting into the oil reserve.
If too much water or fuel gets into the oil reserve, it can lead to major problems for your vehicle. Too much water can induce the oil ventilation system to lock up, which results in a leak. Excess fuel in the oil and it starts to lose its lubricative properties, which lead to engine damage.


Valvoline Express Care Brampton


For regular oil changes, and any other type of automotive maintenance you require, Valvoline Express Care Brampton is an outstanding option. This one-stop-shop for automotive care has been operating in the Brampton area for over 20 years, providing exceptional service and products.


Of all the aspects of consistent vehicular maintenance, oil changes may be the most important. Your car relies on clean oil to allow peak performance, and prevent engine damage and seizure.
Valvoline Express Care offers effective, efficient, and affordable oil changes for people in Brampton and the surrounding areas.


Don’t take any chances this winter; get your vehicle ready for the upcoming season. When you take your car to Valvoline Express Care, professional automotive technicians can inspect your car for safety and performance.


While your car is raised up for an oil change, this can also be an ideal time for tire rotation and rust proofing for the undercarriage of your vehicle.

How to Care for a Newly Replaced Windshield?

How to Care for a Newly Replaced Windshield?

by | Oct 6, 2021 | Auto Glass Windshield Replacement, emissions testing brampton

After the windshield replacement procedure, good maintenance and care will inevitably follow. This can provide long-lasting effects as well as maintain the appearance of your car. Additionally, caring for your new windshield will not compromise your safety in case the parts loosen.

You can consider the following tips to ensure your new windshield is always in good condition after installation. Here they are:

  1.  Do Not Drive Your Car Right After the Replacement Process

Actually, It has been a while since you took your car for a drive. You just got a cracked windshield repaired and can’t wait to take it for a road test. Unfortunately, you have to give your car some time to heal and for the adhesive to dry completely before driving again.

  1. Avoid Slamming the Doors

During installation, professional urethane as an adhesive is used to repair chipped windshields or attach new ones. Slamming the doors can weaken the adhesive seal, which in return causes it to rupture. Therefore, always close the doors lightly on the first few days after repair.

Leave the tape on

The use of retention tape holds the windshield moldings in place and protects the seal from any weather components like dirt and debris. This ensures that the adhesive dries effectively and completely. Thus, it is better to leave the tape in place for at least 24 hours after replacement.

  1. Avoid Taking Your Car to Car Washes

As much as you’d like to get your car cleaned by a professional, it can be extremely risky as most car washes use high-pressure jets and motor pumps. These cleaning methods can weaken the adhesive, especially if it is yet to dry completely. Moreover, if the car wash uses harsh cleaning detergents, it may later destroy silicon-based adhesives and sealants.

However, you can still wash your car at home with mild detergents then sprinkle water in a soft motion.

  1. Open a Window

Air pressure can weaken the adhesive seal, as seen in point 4 above. Therefore, it is best if you roll down a window to at least an inch. Do this on the first day after replacement to ensure the adhesive dries optimally.

  1. Clear Any Item Near the Windshield

Anything that is near your car can interfere with the drying of the adhesive. The item may push against the windshield and touch the wet urethane before it completely dries. Therefore, ensure you don’t use a cover or a sunshade on your car’s exterior and interior parts. Do this up to around 48 hours after the speedy glass replacement.

How to Identify a Poorly Installed Windshield

A poorly done windshield should not be taken lightly as it can cause risks and accidents. Thus, if you want to ensure safety, then consider checking out the following signs in case of a faultily installed windshield:

  • The Windshield Isn’t Flush

Flush means that the windshield fits perfectly into your car’s frame without the need for adjustments. Therefore, make sure your windshield is secured faultlessly after your speedy glass replacement procedure.

  • Uneven Frame Mold

Always examine any bumpy molding around your windshield’s glass frame. This will ensure long-lasting effects as well as prevent possible risks.

  • The Windshield Still Contains Intact Adhesives From Your Old One

If your windshield is properly done, then no adhesives should be left behind after repair.

  • Leaking Edges

A good windshield replacement method should not leak on the edges. Therefore, when getting your car after the repair, make sure you ask the staff to sprinkle water around the edges of the windshield. If the windshield’s interior shows signs of fogging or water leaks inside, then the windshield is poorly done.

Conclusion

Your new windshield is always vulnerable during the first two days after replacement. Therefore, make sure you have patience and commitment before resuming your car’s normal functions. Moreover, consider taking your car to a professional and prevent faulty results.

Get perfect oil for your vehicle at Valvoline Express Care Brampton

Get perfect oil for your vehicle at Valvoline Express Care Brampton

by | Sep 9, 2021 | oil change brampton

Valvoline motor oil was first created over 150 years ago. Valvoline has been working steadily since then to improve, and reinvent the original formula to bring you a variety of options for your vehicle.
Choose the perfect oil for your car from the Valvoline family of motor oil series. Here are a few selections:

  • Valvoline Premium Conventional Motor Oil
  • Valvoline MaxLife Synthetic Blend Motor Oil
  • Valvoline SynPower Full Synthetic Motor Oil
  • Valvoline Full Synthetic with MaxLife Technology

Valvoline Premium Conventional Motor Oil

This is one of the first motor oils ever invented that is made for all climates and weather conditions. Some of the benefits you get from using Valvoline Premium are:

  • Eradicates buildup of dirt and debris forming sediment and other deposits, leaving the engine clean and operating efficiently
  • Over time, motor oil gets thicker and more abrasive, functioning less efficiently in the engine. Valvoline Premium combats against thickening using a method called solid oxidation control
  • By means of reducing friction it improves fuel economy, keeping the engine running smoothly
  • Exceeds anti-wear protection standards

Valvoline MaxLife Synthetic Blend Motor Oil

This oil was designed to help maximize the life of your engine. Some of the benefits of MaxLife Synthetic Blend are:

  • Developed using anti-wear agents and sealing conditioners to protect against the 4 major sources of engine disintegration:
    • Leaks
    • Metal on metal friction
    • Deposits and sludge
    • Decreased fuel economy causing increased oil consumption
  • Rejuvenation for older vehicles that have seen a lot of miles
  • Anti-oxidant additives that maximize engine life by improving gas mileage and horsepower
  • Specialized detergents bind to metal to reduce deposits and sludge
  • Designed to revitalize engines with over 75,000 miles or promote longevity in newer engine

Valvoline SynPower Full Synthetic Motor Oil

Designed to minimize heat and stress on your engine, while maximizing performance. A few of the benefits of SynPower Full Synthetic are:

  • Protects your engine against over-heating, sludge and deposits, and wear and tear
  • Uses varnish protection to provide a thorough cleaning
  • Stabilizes increased oil viscosity when engine is operating at elevated temperatures that may occur in severe environmental conditions
  • Decreased start up and ignition issues due to faster oil flow, even in cold temperatures
  • Long-lasting anti-wear additives to safeguard your engine
  • Improves fuel economy

Valvoline Full Synthetic with MaxLife Technology

This oil is designed to keep your engine running like new, regardless of the age and mileage on your vehicle. Some of the benefits of Full Synthetic with MaxLife Technology are:

  • Rejuvenates engine block seals to protect against leaks, using specialized conditioners
  • Increased horsepower and fuel economy with special additives that reduce friction
  • Avoid engine breakdown due to high viscosity with shear stable viscosity modifiers
  • Prevention of early engine wear with ash-free, anti-wear agents
  • Can be used in newer vehicles to proactively battle engine wear, or used in more heavily traveled vehicles to preserve and reinvigorate the engine

Valvoline Express Care Brampton

Stop in to Valvoline Express Care Brampton to find out more information about the perfect motor oil for your vehicle.

The professional automotive experts at Valvoline Express Care Brampton can take care of all your automotive needs, providing regular maintenance preserving the value of your vehicle, while keeping it running at peak performance.

Vehicle Rust Proofing Brampton

Vehicle Rust Proofing Brampton

by | Aug 9, 2021 | Rust Proofing Brampton

Preventing your vehicle from rusting is one of the best ways to preserve its value and appearance. Whether you are driving a new vehicle or a car you have had for years, rust proofing is essential to protect your vehicle from harmful environmental elements.

Rust Prevention for New Vehicles

A lot of people tend to assume that if a new vehicle had rust proofing services performed at the factory, they are set for life. One instance of rust coating will not last for the life of your vehicle. Rust proofing should be done regularly to provide optimal protection.

Factory rust protection jobs are usually not as meticulous and comprehensive as rust coating services carried out by a rust proofing specialist.

Valvoline Express Care Brampton is a prime example of a rust proofing specialist. The rust proof experts at Valvoline have been protecting new and old vehicles in the Brampton area for more than 20 years.
There seem to be some common misunderstandings when it comes to rust proofing new vehicles. Some car owners believe that new cars have no need for rust proofing, and that it can in fact be detrimental to their vehicles. Rust proofing services done by an automotive professional will not affect or damage any existing rust coating done at the factory. It should also not affect the warranty of your vehicle, but you may want to consult the warranty just to make sure.

Rust Prevention Techniques

There are various actions that can be taken to help prevent your vehicle from rusting and corroding. Here are some suggestions:

  • Rust proofing services from an automotive professional
  • Wash and wax your car regularly
  • Routine inspections

Rust Proofing Services Brampton

The most efficient and practical way to prevent rust from forming on your automobile is by enlisting the services of a professional.

Valvoline Express Care uses specialized chemical compounds to provide long-term rust protection for your vehicle. This service is customized to be as effective as possible for your specific automobile. A full inspection will be done of your car to ensure no area is left unprotected.
Some benefits of this service are:

  • Preserving vehicle value
  • Paint protection
  • Vehicle safety
  • Rust treatment, protection, and prevention

Wash and Wax

Washing and waxing your vehicle on a regular basis can help keep it free of harmful and corrosive contaminants. It is recommended to wash your car as much as needed, depending on driving and weather conditions. If the roads are wet and covered in salt, you want to prevent that salt and moisture from collecting in the various nooks and crannies of your vehicle.

Waxing your car regularly also helps protect the paint and prevent corrosion.

Routine Inspections

Taking the time to examine your vehicle for rust on a regular basis can be very helpful and preventative. Look for bubbles or blisters in the paint that mark the beginnings of rust formation. Also look for any chips and scratches in the paint or metal that could quickly turn into rust. Don’t forget to check the engine, trunk, and wheel wells.

At the first sight of any potential corrosion, take your vehicle to rust proof specialist for rust prevention.